Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › TELEVISION CAMERA

TELEVISION CAMERA > REMOVAL



1. REMOVE TAIL GATE PROTECTOR RH


B088128
  1. Using a "TORX" socket wrench T30, remove the 7 screws.



    B088129E01
  1. Disengage the 10 claws and remove the tail gate protector RH.



2. REMOVE TAIL GATE SERVICE HOLE COVER


B088130
  1. Using a "TORX" socket wrench T30, remove the 8 screws and tail gate service hole cover.



3. REMOVE TELEVISION CAMERA ASSEMBLY


E168709
  1. Remove the 2 bolts and television camera.

  1. Disconnect the connector.