Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL RECEIVER

DOOR CONTROL RECEIVER > INSTALLATION

for Preparation Click here



1. INSTALL DOOR CONTROL RECEIVER


B203561
  1. Install the door control receiver with the 2 screws.

  1. Connect the connector.



2. INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY RH
  1. Engage the 2 clips and install the instrument panel lower finish panel sub-assembly RH.

  1. Install the bolt <B>.



3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY


    B290404
  1. Pull the bottom of the stopper.



    B290405
  1. Attach the stopper to the glove compartment door as shown in the illustration.



    E232355
  1. Install the glove compartment door assembly with 3 hinges, holding it horizontal.



    E232356
  1. Slightly deform the upper part of the glove compartment door assembly, and install the glove compartment door assembly.