Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM

AUDIO AND VISUAL SYSTEM > Satellite Radio Broadcast cannot be Received

for Preparation Click here


INSPECTION PROCEDURE

NOTICE:
  1. Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, the broadcast will not be able to be listened to or viewed.
  2. After replacing the radio receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM Radio ID registration is necessary (w/ SDARS System).

1.CHECK SURROUNDINGS


  1. Check if the vehicle is in an environment where reception is difficult due to something blocking the area above the vehicle.


    I100196E28


    Text in Illustration 
    *a
    Example
    *b
    In a tunnel
    *c
    In a building
    *d
    Under an overpass
    *e
    On a forest or tree-lined path
    *f
    Between tall buildings
    *g
    Under a cliff or overhang
    -
    -

    HINT:
    If the area above the vehicle is blocked, such as when in a building or tunnel, reception may not be possible.

    OK:
    Area above vehicle is not blocked.



NG
END (MOVE VEHICLE TO LOCATION WHERE RECEPTION IS BETTER)
OK


2.CHECK RADIO RECEIVER ASSEMBLY
Check if CH001 (free broadcast) can be received.

OK:
CH001 can be received.



NG
Go to step 6
OK


3.CHECK DISPLAY SETTING
Check the display screen.
Result 
Condition
Proceed to
"UPDATING" is displayed
A
"-----" is displayed
B
None of the displays above are shown
C


B
THERE IS NO SONG/PROGRAM TITLE OR ARTIST NAME/FEATURE ASSOCIATED WITH CHANNEL AT THAT TIME

C
Go to step 6
A


4.CHECK CONTRACT CONDITIONS
  1. Check if the pay-type contract has been extended, or if the contract period has ended.

    OK:
    Pay-type contract is valid.



NG
TO RECEIVE PAY-TYPE BROADCASTS, CONTRACT MUST BE MADE WITH SATELLITE RADIO COMPANY
OK


5.PERFORM ACTIVATION REFRESH
  1. Perform activation refresh by referring to satellite radio tuner company web site (http://www.xmradio.com/refresh/).

    OK:
    Malfunction disappears.

    HINT:
    The XM radio ID that is necessary to perform activation refresh can be displayed when CH000 is selected on the satellite radio.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

END 

6.CHECK DISPLAY
  1. Check the display screen.
    Result 
    Condition
    Proceed to
    "ANTENNA" is displayed
    A
    "NO SIGNAL" is displayed
    B
    "LOADING" is displayed
    B
    "OFF AIR" is displayed
    C
    After "---" is displayed, display automatically switches to CH001
    D
    None of the displays above are shown
    E



B
END (MOVE VEHICLE TO LOCATION WHERE RECEPTION IS BETTER)

C
CHANNEL IS CURRENTLY NOT BEING BROADCAST. BROADCAST CAN BE LISTENED TO OR VIEWED WHEN IT IS BACK ON AIR (CONFIRM WITH RADIO STATION)

D
CHANNEL BROADCAST HAS ENDED (CONFIRM WITH RADIO STATION)

E
Go to step 8
A


7.CHECK CONNECTION OF ANTENNA CABLE
  1. Check if the satellite radio antenna cable is securely connected to the satellite radio tuner.

    OK:
    Satellite radio antenna cable is securely connected.



NG
SECURELY CONNECT SATELLITE RADIO ANTENNA CABLE
OK

REPLACE SATELLITE RADIO ANTENNA ASSEMBLY (Click here)  

8.CONFIRM CURRENTLY SELECTED CHANNEL
  1. Confirm if CH000 is currently selected.

    OK:
    CH000 is selected.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

END (CH000 HAS NO SOUND. SELECT ANOTHER CHANNEL)