Home › DRIVE LINE › DIFFERENTIAL › FRONT DIFFERENTIAL CARRIER ASSEMBLY (for 4WD)

FRONT DIFFERENTIAL CARRIER ASSEMBLY (for 4WD) > REMOVAL > Preparation



SST 
I002911
09520-01010
Drive Shaft Remover Attachment


I000042
09520-24010
Differential Side Gear Shaft
Puller

I001331
(09520-32040)
Shocker Set


I000080
09628-62011
Ball Joint Puller




EQUIPMENT
Torque wrench

Micrometer

Dial indicator

Feeler gauge

Vernier caliper

Deep Socket Wrench 24 mm

Slide calipers

Press

Angle gauge



LUBRICANT
Item
Capacity
Classification
Front differential oil
1.45 to 1.55 liters
(1.54 to 1.64 US qts, 1.28 to1.36 lmp. qts)
Toyota Genuine Differential gear oil LT 75W-85 APL GL-5 or equivalent
Rear differential oil
2WD
3.26 to 3.36 liters
(3.45 to 3.55 US qts, 2.87 to 2.95 lmp. qts)
Toyota Genuine Differential gear oil LT 75W-85 APL GL-5 or equivalent
Rear differential oil
Pre, 4WD
2.75 to 2.85 liters
(2.91 to 3.01 qts, 2.42 to 2.50 lmp. qts)
Toyota Genuine Differential gear oil LT 75W-85 APL GL-5 or equivalent


RECOMMENDED TOOLS
I002297
09011-12301
Socket Wrench 30 mm

I000322
09031-00030
Pin Punch

I000114
09905-00012
Snap Ring No.1 Expander

I000115
09905-00013
Snap Ring Pliers



SSM
Toyota Genuine Seal Packing 1281, Three Bond 1281 or equivalent
-
Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
-
Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
-
Toyota Genuine Adhesive 1360K, Three Bond 1360K or equivalent
-