Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM (for Regular Cab and Double Cab)

AUDIO AND VISUAL SYSTEM (for Regular Cab and Double Cab) > Pressing Power Switch does not Turn on System

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK VEHICLE CONDITION
  1. Check that conditions in the cabin are not likely to cause condensation.

    HINT:
    This problem occurs when the cabin is humid and the temperature changes rapidly. This may produce condensation, resulting in a short circuit.

    OK:
    Condensation is not likely to be produced.



NG
DRY OUT CABIN AND RECHECK CONDITION
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)