Home › INTRODUCTION › INTRODUCTION › REPAIR INSTRUCTION

REPAIR INSTRUCTION > CUSTOMIZE PARAMETERS


HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.


CUSTOMIZING FUNCTION WITH THE TECHSTREAM
  1. POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

    Tilt & Telescopic 
    Display
    Default
    Contents
    Setting
    Autoaway / Return function
    ON
    ON/OFF of the auto away / return function
    ON/OFF

  2. AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)

    Air Conditioner 
    Display
    Default
    Contents
    Setting
    Set Temperature Shift
    Normal
    Function to control the shifted temperature in relation to the displayed temperature
    +2 C / +1 C / Normal / -1 C / -2 C
    Air Inlet Mode
    Automatic
    In case of turning the A/C ON to cool down the cabin quickly, this is the function to change the mode automatically to RECIRCULATION mode
    Manual / Automatic
    Compressor Mode
    Automatic
    Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF
    Manual / Automatic
    Compressor/Air Inlet DEF Operation
    Link
    Function to turn the A/C ON automatically linked with the FRONT DEF button when A/C is OFF
    Normal / Link
    Foot/DEF Auto Mode
    ON
    Function to turn the airflow from FOOT / DEF ON automatically when AUTO MODE is ON
    OFF / ON
    Foot/DEF Automatic Blow Up Function
    ON
    Function to change the blower level automatically when the defroster is ON
    OFF / ON
    Ambient Temperature Shift
    Normal
    Function to control the shifted ambient temperature in relation to the displayed ambient temperature
    +3 C / +2 C / +1 C / Normal / -1 C / -2 C / -3 C

  3. AIR CONDITIONING SYSTEM (for Manual Air Conditioning System)

    Air Conditioner 
    Display
    Default
    Contents
    Setting
    Ambient Temperature Shift
    Normal
    Function to control the shifted ambient temperature in relation to the displayed ambient temperature
    +3 C / +2 C / +1 C / Normal / -1 C / -2 C / -3 C

  4. THEFT DETERRENT SYSTEM

    Main Body 
    Display
    Default
    Contents
    Setting
    Warning by Horn
    ON
    Function that allows vehicle horns and theft deterrent horn to be used as warning device.
    ON or OFF
    Passive Mode (Security system)
    OFF
    Passive arming mode is function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is not inside vehicle and driver side door is closed.
    In passive arming mode, theft deterrent system will judge that theft is taking place and switch to alarm sounding state if one of following operations are not performed within 14 seconds (see entry delay below) after door is opened:
    1. Unlock any door by key or wireless operation
    2. Turn ignition switch ON
    ON or OFF
    Entry Delay
    14 s
    Function that changes entry delay time (time before warning starts) for PASSIVE ARMING MODE
    0 s / 14 s / 30 s
    Warning by Glass Broken Sensor*
    ON
    Function that turns glass breakage sensor ON/OFF.
    This function is only effective for vehicles with glass breakage sensor.
    ON or OFF

    HINT:
    *: w/ Glass Breakage Sensor

  5. LIGHTING SYSTEM

    Main Body 
    Display
    Default
    Contents
    Setting
    I/L ON / ACC OFF
    ON
    Illuminates light when ignition switch turned to ACC
    (Room light illuminated when interior light switch set to DOOR)
    ON / OFF
    Lighting Time
    15s
    Changes illumination duration after door closure
    (It will quickly fade out when turning ignition switch ON)
    7.5s / 15s / 30s
    I/L ON / Unlock
    ON
    Function to light up room light when unlocking with door key cylinder
    (Room light illuminated when interior light switch set to DOOR)
    ON / OFF
    Light OFF Delay
    30s
    Function to continue illuminating headlight for certain period of time after closing all doors with ignition switch turned from ON to OFF under condition that light control switch is at HEAD or AUTO with the headlight ON
    OFF / 30s / 60s / 90s
    Sensitivity
    NORMAL
    Function to adjust sensitivity of lighting illumination*1
    LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
    Disp Ex ON Sen
    NORMAL
    Changes brightness when lowering lights such as combination meter indicator light, A/C indicator light, and clock light*2
    LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
    Disp Ex OFF Sen
    NORMAL
    Changes brightness when canceling lowering lights such as combination meter indicator light, A/C indicator light, and clock light*3
    LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2

    HINT:
    *1: The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.


    *1 
    Lighting brightness

    E107164

    Setting
    DARK2
    DARK1
    NORMAL
    LIGHT1
    LIGHT2

    *2 
    Brightness when lowering the lights

    E107164

    Setting
    DARK2
    DARK1
    NORMAL
    LIGHT1
    LIGHT2

    *3 
    Brightness when canceling the lowering of the lights

    E107164

    Setting
    DARK2
    DARK1
    NORMAL
    LIGHT1
    LIGHT2

  6. POWER DOOR LOCK CONTROL SYSTEM

    Main Body 
    Display
    Default
    Contents
    Setting
    Unlock Key Twice
    ON
    Function that unlocks only driver side door when driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For OFF setting, turning it once unlocks all doors.
    ON/OFF
    Auto lock
    OFF
    Function that locks all doors when vehicle speed reaches a certain level.
    ON/OFF
    Auto Lock/Shift
    ON
    With engine running and all doors closed, function that locks all doors when lever is moved to P from any position other than P.
    ON/OFF
    Auto Unlock/Shift
    ON
    Function that unlocks all doors when lever is moved to P from any position other than P while ignition switch is ON.
    ON/OFF
    All Unlock/Open-Close
    OFF
    Function that unlocks all other doors when opening driver door within 10 seconds after turning ignition switch ON.
    ON/OFF

  7. WIRELESS DOOR LOCK CONTROL SYSTEM

    Main Body 
    Display
    Default
    Contents
    Setting
    Hazard Answer Back
    ON
    When LOCK switch on transmitter is pressed, all hazard warning lights illuminate once. When UNLOCK switch is pressed, all hazard warning lights illuminate twice.
    ON / OFF
    Wireless Buzzer Resp
    ON
    Function that makes wireless buzzer sound for answer-back when transmitter LOCK / UNLOCK switch is pressed.
    ON / OFF
    Open Door Warning
    ON
    If door is not completely closed and transmitter LOCK switch is pressed, this function sounds a buzzer for 10 seconds.
    ON / OFF
    Wireless Control
    ON
    ON / OFF of wireless door lock function.
    ON / OFF
    Panic Function
    ON
    Operates security alarm when PANIC switch on transmitter is continuously pressed for 1 second.
    ON / OFF
    Unlock 2 Operation
    ON
    Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock.
    ON / OFF
    Wireless Auto Lock
    ON
    Function to control automatic relocking of doors after unlocking with wireless door lock function.
    ON / OFF
    Auto Lock Time
    30 seconds
    Function to change time until relocking after unlocking.
    60 seconds/30 seconds

  8. METER / GAUGE SYSTEM

    Warning: 
    Display (Item)
    Default
    Contents
    Setting
    Key Remind Volume
    Large
    To change volume of key reminder buzzer
    Large / Medium / Small
    Key Remind Sound
    1200
    To change frequency of key reminder buzzer
    600 / 900 / 1200
    P-Seatbelt Warning Buzzer
    ON
    To change setting of passenger side seat belt warning buzzer
    ON / OFF

  9. SLIDING ROOF SYSTEM

    Sliding Roof 
    Display (Item)
    Default
    Contents
    Setting
    Door Key Related Open
    ON
    Function to manually open sliding roof linked with power window if holding driver side door key for 3 seconds or more to unlock position when ignition switch is OFF
    ON / OFF
    Door Key Related Close
    ON
    Function to manually close sliding roof linked with power window if holding driver side door key for 3 seconds or more to lock position when ignition switch is OFF
    ON / OFF
    Door Key Related Operation
    SLIDE
    Function to select tilt up or slide open of manual sliding roof operation linked with power window activated by holding driver side door key for 3 seconds or more to unlock position when ignition switch is OFF
    TILT / SLIDE


CUSTOMIZING FUNCTION WITH MULTI-INFORMATION DISPLAY (w/ Multi-information Display)


  1. Using the SETUP switch and SELECT switch, the following functions can be customized through the multi-information display. Refer to the illustration below.

    1. Unit setting
    2. Wireless door lock control system (answer-back function, automatic lock function, 2-step unlock function)
    3. Power door lock control system (automatic door lock function, automatic door unlock function)
    4. Lighting system (auto light turn off function)
    5. Default setting (customize setting cancel function)

    E144059E01


    E144060E01


    E145767E01


    E144061E01

    HINT:
    *: When setting change operation is performed by SELECT switch, writing of customized value must be performed.