Components
| Function
|
Ultrasonic sensor
| The ultrasonic sensor sends and receives ultrasonic waves. Based on the received wave, the sensor calculates the approximate distance value between the vehicle and the obstacle, and sends the distance value as a signal to the clearance warning ECU.
|
Accessory meter
| - Displays the location of the obstacle and the approximate distance between the vehicle and the obstacle. Turns the intuitive parking assist system on and off.
- Emits an intermittent sound to inform the driver that the ECU has detected an obstacle within prescribed ranges.
|
Clearance sonar main switch
| Built into drive monitor switch. Output system ON/OFF signals to clearance warning ECU.
|
Clearance warning ECU
| Receives signals from the ultrasonic sensors and sends the display signal and buzzer signal to the accessory meter.
|
Combination meter
| Receives speed of each wheel via the skid control ECU, and then sends the signal to the clearance warning ECU.
|
Park / Neutral position switch
| Sends a signal that activates the intuitive parking assist system when the shift lever is moved to the R position.
|