Home › COMMUNICATION SYSTEM › MULTIPLEX COMMUNICATION › LIN COMMUNICATION SYSTEM

LIN COMMUNICATION SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



LIN COMMUNICATION SYSTEM DESCRIPTION
  1. The LIN communication system is used for communication between the components below.
  2. The LIN communication system has a component as a control master.
  1. Heater Components That Use LIN Communication

    1. Air Conditioning Amplifier Assembly (A/C ECU)*

      HINT:
      *: Control master

    2. Integration Control and Panel Assembly

  2. Sliding Roof Components That Use LIN Communication Bus (w/ Sliding Roof)

    1. Main Body ECU (Driver Side Junction Block)*

      HINT:
      *: Control master

    2. Sliding Roof Drive Gear Sub-assembly (Sliding Roof ECU)


LIN COMMUNICATION SYSTEM DTCs*
The control master component shown below outputs LIN communication system DTCs when there is a malfunction in the LIN communication. If a LIN communication stops, the control master of that part of the LIN communication system outputs DTCs.

HINT:
*: w/ Sliding Roof

  1. Main Body ECU (Driver Side Junction Block)