Home › TRANSMISSION ยท AB60F AUTOMATIC TRANSMISSION › PARK / NEUTRAL POSITION SWITCH

PARK / NEUTRAL POSITION SWITCH > ADJUSTMENT

for Preparation Click here



1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY


D025795E10
  1. Loosen the bolt of the park/neutral position switch and move the shift lever to the N position.

  1. Align the groove with the neutral basic line.

  1. Hold the switch in the position described above and tighten the bolt.

    Torque:
    13 N*m{ 130 kgf*cm , 10 ft.*lbf }

  1. After the adjustment, perform the on-vehicle inspection (Click here).