FAN > REMOVAL |
| 1. REMOVE NO. 1 ENGINE UNDER COVER |
Remove the 5 bolts, 3 screws and engine under cover.
| 2. DRAIN ENGINE COOLANT |
Loosen the radiator drain cock plug and 2 cylinder block drain cock plugs.
Remove the radiator cap. Then drain the coolant.
Tighten the 2 cylinder block drain cock plugs.

Tighten the radiator drain cock plug by hand.
| 3. REMOVE V-BANK COVER |
![]() |
Remove the 2 nuts and V-bank cover.
| 4. REMOVE RADIATOR HOSE INLET |
| 5. REMOVE RADIATOR HOSE OUTLET |
| 6. REMOVE FAN SHROUD |
![]() |
Loosen the 4 nuts holding the fluid coupling fan.
Remove the fan and generator V-belt (Click here).
![]() |
Disconnect the reservoir hose from the radiator tank upper.
Remove the 2 bolts holding the fan shroud.
Remove the 4 nuts of the fluid coupling fan, and then remove the shroud together with the coupling fan.
Remove the fan pulley from the water pump.
| 7. REMOVE FAN |
![]() |
Remove the 4 nuts and fan from the fluid coupling.