OIL COOLER (w/ Trailer Towing System) > REMOVAL |
| 1. REMOVE FRONT BUMPER ASSEMBLY |
for Steel Type:
Remove the front bumper (Click here).
for Resin Type:
Remove the front bumper (Click here).
| 2. DISCONNECT TRANSMISSION OIL COOLER HOSE |
![]() |
Remove the bolt and move the water by-pass pipe so that the 2 transmission oil cooler hoses can be disconnected.
Disconnect the inlet No. 2 transmission oil cooler hose and outlet No. 2 transmission oil cooler hose.
![]() |
Detach the claw to open the flexible hose clamp.
Disconnect the inlet No. 1 oil cooler hose and outlet No. 1 oil cooler hose.
| 3. REMOVE OIL COOLER TUBE |
![]() |
Remove 2 bolts and oil cooler tube.
| 4. REMOVE OIL COOLER ASSEMBLY |
![]() |
Remove the 3 bolts and oil cooler.
![]() |
Remove the 2 bolts and oil cooler support.
Remove the 4 bolts and separate the No. 1 and No. 2 oil cooler air ducts.