FRONT SHOCK ABSORBER > INSTALLATION |
| 1. TEMPORARILY INSTALL FRONT SHOCK ABSORBER WITH COIL SPRING |
![]() |
Temporarily install the upper side of the shock absorber to the chassis frame with the 4 nuts.
![]() |
Temporarily install the lower side of the shock absorber to the lower suspension arm with the bolt, washer and nut.
| 2. STABILIZE SUSPENSION |
Lower the vehicle.
Press down on the vehicle several times to stabilize the suspension.
| 3. TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING |
![]() |
Tighten the nut.
![]() |
Tighten the 4 upper nuts in diametrically opposite pairs.
Check that the first nut that was tightened is at the torque specification.
| 4. INSTALL FRONT WHEEL |