Function
| Outline
|
All door lock function
| Pressing LOCK switch locks all doors.
|
Only driver side door unlock operation function
| Pressing UNLOCK switch once unlocks only driver side door.
|
All door unlock operation (2 step unlock operation) function
| Pressing UNLOCK switch twice within 3 seconds unlocks all doors after driver side door is unlocked.
|
Answer-back function
| - Hazard warning lights and door mirror turn indicators flash once when doors are locked, and flash twice when doors are unlocked to indicate that operation has been completed.
- Wireless door lock buzzer sounds once when doors are locked, and sounds twice when doors are unlocked to inform that operation has been completed.
|
Automatic locking function
| If no doors are opened within 30 seconds after being unlocked by wireless transmitter, all doors are locked again automatically.
|
Door ajar warning function
| If any door is open or ajar, pressing LOCK switch will cause wireless door lock buzzer to sound for about 10 seconds.
|
Illuminated entry function
| If locked doors are unlocked through wireless operation, ignition key cylinder light, map light, room light, foot light and door mirror foot light* illuminate. If one of following situations occurs, lights fade out:
- Within 15 seconds, doors are not opened and doors are locked through wireless operation.
- Within 15 seconds, key is inserted into ignition key cylinder and ignition switch is turned ACC or ON.
- No operations or actions are performed within 15 seconds.
|
Panic function
| Holding down PANIC switch for more than 1 second sounds security horn and vehicle horns, blinks hazard warning lights, headlights, taillights and door mirror turn indicators, and illuminates map light and room light.
|
Security function
| Sends signal as rolling code.
|
Transmitter recognition code registration function
| Enables 4 modes for registering (writing and storing) transmitter recognition codes in EEPROM built into door control receiver.
|