Home › BODY ELECTRICAL › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM

WIRELESS DOOR LOCK CONTROL SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC
  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch ON and turn the Techstream on.

  3. Enter the following menus: Body Electrical / Main Body / Trouble Codes.

  4. Check DTCs.

    HINT:
    Refer to the Techstream operator's manual for further details.

  5. Confirm the details of the DTCs (Click here).


CLEAR DTC
  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch ON and turn the Techstream on.

  3. Enter the following menus: Body Electrical / Main Body / Trouble Codes.

  4. Erase DTCs.

    HINT:
    Refer to the Techstream operator's manual for further details.