WIRELESS DOOR LOCK CONTROL SYSTEM > CUSTOMIZE PARAMETERS |
| CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE) |
Connect the Techstream to the DLC3.
Turn the ignition switch ON.
Turn the Techstream on.
Enter the following menus: Customize Setting.
Select the setting by referring to the table below.
| Display | Default | Contents | Setting |
| Hazard Answer Back | ON | When LOCK switch on transmitter is pressed, all hazard warning lights illuminate once. When UNLOCK switch is pressed, all hazard warning lights illuminate twice. | ON / OFF |
| Wireless Buzzer Resp | ON | Function that makes wireless buzzer sound for answer-back when transmitter LOCK / UNLOCK switch is pressed. | ON / OFF |
| Open Door Warning | ON | If door is not completely closed and transmitter LOCK switch is pressed, this function sounds a buzzer for 10 seconds. | ON / OFF |
| Wireless Control | ON | ON / OFF of wireless door lock function. | ON / OFF |
| Panic Function | ON | Operates security alarm when PANIC switch on transmitter is continuously pressed for 1 second. | ON / OFF |
| Unlock / 2 Operation | ON | Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. | ON / OFF |
| Wireless Auto Lock | ON | Function to control automatic relocking of doors after unlocking with wireless door lock function. | ON / OFF |
| Auto Lock Time | 30 seconds | Function to change time until relocking after unlocking. | 60 seconds/30 seconds |