Home › ENGINE ยท 2UZ-FE › INTAKE › INTAKE SYSTEM

INTAKE SYSTEM > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT INTAKE AIR CONTROL VALVE OPERATION


    A156185
  1. Start the engine.

  1. While the engine is idling, check that the actuator rod moves as shown in the illustration.



    A156186E01
  1. Disconnect the VSV connector, and check that the actuator rod returns.
    If the operation is not as specified, inspect the intake air control valve, VSV and ECM.



2. CHECK AIR INDUCTION SYSTEM



A156156E01

HINT:
The illustration shows the areas that may draw in secondary air, which could lead to idling problems.

  1. Check that the hoses are installed correctly.

  1. Check for cracks, etc. in the hoses.