Home › ENGINE ยท 2UZ-FE › LUBRICATION › OIL PUMP

OIL PUMP > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT CRANKSHAFT OIL SEAL


    A134818E01
  1. Using a screwdriver, pry out the oil seal.

    NOTICE:
    Do not damage the surface of the oil seal press fit hole.



2. REMOVE OIL PUMP RELIEF VALVE


    A150118
  1. Remove the plug, compression spring and relief valve.



3. REMOVE OIL PUMP COVER


    A150119
  1. Remove the 10 screws, pump cover and drive and driven rotors.