THERMOSTAT > REMOVAL |
| 1. REMOVE NO. 1 ENGINE UNDER COVER |
Remove the 5 bolts, 3 screws and engine under cover.
| 2. DRAIN ENGINE COOLANT |
Loosen the radiator drain cock plug and 2 cylinder block drain cock plugs.
Remove the radiator cap. Then drain the coolant.
Tighten the 2 cylinder block drain cock plugs.

Tighten the radiator drain cock plug by hand.
| 3. REMOVE V-BANK COVER |
![]() |
Remove the 2 nuts and V-bank cover.
| 4. DISCONNECT RADIATOR HOSE OUTLET |
| 5. REMOVE WATER INLET WITH THERMOSTAT |
![]() |
Remove the 3 nuts, water inlet with thermostat and gasket.