Home › ENGINE ยท 1GR-FE › ENGINE MECHANICAL › CYLINDER HEAD

CYLINDER HEAD > DISASSEMBLY

for Preparation Click here



1. REMOVE VALVE LIFTER

HINT:
Arrange the valve lifters in the correct order.



2. REMOVE VALVE

HINT:
Arrange the valves, inner compression springs, valve spring retainers and valve spring retainer locks in the correct order.



    A075602E04
  1. Place the cylinder head on a wooden block.

  1. Using SST, compress the inner compression spring and remove the valve spring retainer lock.

    SST
    09202-70020   (09202-00010)

  1. Remove the valve, inner compression spring, valve spring and valve spring retainer.



3. REMOVE VALVE SPRING SEAT


    A075603E01
  1. Using compressed air and a magnetic finger, remove the valve spring seat by blowing air.



4. REMOVE VALVE STEM OIL SEAL


    A075604E01
  1. Using needle-nose pliers, remove the valve stem oil seal.