Home › TRANSMISSION · A750F AUTOMATIC TRANSMISSION › SPEED SENSOR

SPEED SENSOR > INSPECTION

for Preparation Click here



1. INSPECT SPEED SENSOR NT


C110343E53
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    560 to 680 Ω

    If the result is not as specified, replace the sensor.



2. INSPECT SPEED SENSOR SP2


C110343E54
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    560 to 680 Ω

    If the result is not as specified, replace the sensor.