FRONT PROPELLER SHAFT ASSEMBLY > INSTALLATION |
| 1. INSTALL FRONT PROPELLER SHAFT |
![]() |
for Front Differential Side:
Align the matchmarks on the differential and propeller shaft flange.
Install the propeller shaft with the 4 washers and 4 nuts.
![]() |
for Transfer Side:
Align the matchmarks on the transfer and propeller shaft flange.
Connect the propeller shaft with the 4 washers and 4 nuts.
| 2. INSTALL PROPELLER SHAFT HEAT INSULATOR BRACKET SUB-ASSEMBLY |
Install the heat insulator bracket to the crossmember with the 2 bolts.
| 3. INSTALL PROPELLER SHAFT HEAT INSULATOR |
![]() |
Install the heat insulator to the heat insulator bracket with the 2 bolts.