Home › ENGINE ยท 1GR-FE › IGNITION › IGNITION COIL AND SPARK PLUG

IGNITION COIL AND SPARK PLUG > REMOVAL

for Preparation Click here



1. REMOVE V-BANK COVER


    A112983E03
  1. Remove the 2 nuts and V-bank cover.



2. REMOVE NO. 2 AIR CLEANER HOSE


A151771
  1. Loosen the hose clamp.

  1. Remove the 2 bolts and air cleaner hose.



3. REMOVE AIR CLEANER ASSEMBLY WITH ELEMENT


    A151812
  1. Disconnect the No. 2 ventilation hose.

  1. Detach the hose clamp.



    A151769
  1. Disconnect the vacuum hose.

  1. Disconnect the MAF meter connector.

  1. Using a clip remover, detach the 2 wire harness clamps.



    A151770
  1. Loosen the hose clamp.

  1. Remove the 2 bolts and air cleaner with element.



4. REMOVE IGNITION COIL ASSEMBLY
  1. Disconnect the 6 ignition coil connectors.



    A151791
  1. Remove the 6 bolts and 6 ignition coils.



5. REMOVE SPARK PLUG
  1. Using a 16 mm plug wrench, remove the 6 spark plugs.