TIRE PRESSURE WARNING VALVE AND TRANSMITTER > REMOVAL |
| 1. REMOVE TIRE |
| 2. REMOVE TIRE PRESSURE WARNING VALVE AND TRANSMITTER |
Remove the valve core and cap, and release the air from the tire.
After ensuring that a sufficient amount of air has been released, remove the nut and washer that is used to secure the tire pressure warning valve and transmitter. Then drop the tire pressure warning valve and transmitter inside the tire.
![]() |
Disengage the bead using the shoe of a tire remover.
Remove the bead on the upper side.
Take out the tire pressure warning valve and transmitter from the tire, then remove the bead on the lower side.