DTC P0604 Random Access Memory (RAM) |
| DTC Code | DTC Detection Condition | Trouble Area |
| P0604 | ECM RAM errors | ECM |
| Related DTCs | None |
| Required Sensors/Components (Main) | ECM |
| Required Sensors/Components (Related) | None |
| Frequency of operation | Continuous |
| Duration | 16 seconds |
| MIL operation | Immediate |
| Sequence of operation | None |
| Monitor runs whenever following DTCs not present | None |
| Main CPU and sub CPU mirroring | Fail |
| 1.CHECK DTC |
Clear DTC (Click here).
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
Connect the cable to the negative (-) battery terminal.
Turn the ignition switch to ON.
Check DTC.
|
| ||||
| OK | ||
| ||