Home › RESTRAINTS › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY (for Center Seat)

FRONT SEAT INNER BELT ASSEMBLY (for Center Seat) > INSTALLATION

for Preparation Click here



1. INSTALL CENTER FRONT SEAT INNER BELT ASSEMBLY


B165811E01
  1. Install the inner belt with the nut.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not overlap the anchor part of the seat belt and protruding part of the seat adjuster.



2. INSTALL CENTER SEAT CUSHION SHIELD LH


B165567
  1. Attach the 7 claws and 2 clips to install the cushion shield.

  1. Using a T30 "TORX" socket, install the bolt.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }



3. INSTALL CENTER SEAT BACK PANEL


B165566
  1. Attach the 4 claws and 4 clips to install the center seatback panel.



    B166347
  1. for Double Cab:

    1. Connect the power outlet socket connector.

    2. Attach the 4 clips to install the center seatback panel.

    3. Install the 2 screws.



    B169093
  1. for CrewMax:

    1. Connect the 2 connectors.

    2. Attach the 4 claws and 4 clips to install the center seatback panel.



4. INSTALL CENTER FRONT SEAT ASSEMBLY
  1. Install the center front seat (Click here).



5. INSTALL FRONT SEAT ASSEMBLY RH
  1. for Power Seat:
    Install the front seat (Click here).

  1. for Manual Seat:
    Install the front seat (Click here).



6. INSTALL FRONT SEAT ASSEMBLY LH
  1. for Power Seat:
    Install the front seat (Click here).

  1. for Manual Seat:
    Install the front seat (Click here).