Home › RESTRAINTS › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY (for Double Cab)

REAR SEAT OUTER BELT ASSEMBLY (for Double Cab) > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.



1. INSTALL REAR SEAT OUTER BELT ASSEMBLY


B166718E01
  1. Align the vehicle's claws with the seat belt retractor positioning holes.

  1. Install the seat belt with the 2 bolts.

    HINT:
    First install bolt A, and then install bolt B.

    Torque:
    for bolt A:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }
    for bolt B:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B166738
  1. Install the shoulder anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY


B165833
  1. Pass the rear seat outer belt floor anchor through the quarter trim panel.

  1. Attach the 4 clips to install the quarter trim panel.

  1. Install the 2 bolts.



    B165712
  1. Attach the claw to install the cover.



3. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY


B165832
  1. Attach the 6 clips to install the quarter trim panel lower.



    B165831
  1. Install the seat belt anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B165830
  1. Attach the 2 claws to install the cover.



4. INSTALL REAR DOOR SCUFF PLATE


B165842
  1. Attach the 6 claws and 2 clips to install the scuff plate.



5. INSTALL REAR SEAT ASSEMBLY
  1. Install the rear seat (Click here).