Home › RESTRAINTS › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY (for CrewMax)

REAR SEAT OUTER BELT ASSEMBLY (for CrewMax) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.



1. REMOVE REAR SEAT ASSEMBLY
  1. Remove the rear seat (Click here).



2. REMOVE BACK PANEL TRIM RH


B169224E03
  1. Remove the package holder net hook.

  1. Detach the 8 clips and remove the back panel trim.



3. REMOVE BACK PANEL TRIM LH
  1. Remove the package holder net hook.



  1. Detach the 8 clips and remove the back panel trim.


    B170105E03



4. REMOVE REAR DOOR SCUFF PLATE


B165842
  1. Detach the 6 claws and 2 clips, and remove the scuff plate.



5. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP
  1. Partially remove the front door opening trim weatherstrip so that the lower quarter trim panel and front quarter trim panel can be removed.



6. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY


B169107
  1. Detach the 2 claws and remove the cover.



    B169108
  1. Remove the bolt and seat belt anchor.



    B169212
  1. for LH Side:
    Detach the 4 clips and remove the lower quarter trim panel.



    B173407
  1. for RH Side:
    Detach the 3 clips and remove the lower quarter trim panel.



7. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY


B165711E02
  1. Using a screwdriver, detach the claw and remove the cover.

    HINT:
    Tape the screwdriver tip before use.



    B165833
  1. Remove the 2 bolts.

  1. Detach the 4 clips.

  1. Pass the rear seat outer belt floor anchor through the quarter trim panel, and remove the quarter trim panel.



8. REMOVE REAR SEAT OUTER BELT ASSEMBLY


B169110
  1. Remove the nut and disconnect the seat belt's shoulder anchor.



    B169111
  1. Remove the 2 bolts and seat belt.



9. REMOVE REAR SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY


B169124
  1. Remove the 2 bolts and adjuster.