WIPER SWITCH > INSTALLATION |
| 1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY |
![]() |
Attach the claw to install the wiper switch.
Connect the 2 connectors.
| 2. INSTALL UPPER STEERING COLUMN COVER |
![]() |
Attach the 4 clips to install the upper steering column cover onto the instrument panel cluster finish panel.
Attach the claw to install the upper steering column cover.
| 3. INSTALL LOWER STEERING COLUMN COVER |
![]() |
Attach the 2 claws to install the lower steering column cover.
Using a screwdriver, while turning the steering wheel to the right and left, install the 2 screws and lower steering column cover.