Home › BODY › ENGINE HOOD / DOOR › HOOD LOCK CONTROL CABLE ASSEMBLY

HOOD LOCK CONTROL CABLE ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE HOOD LOCK CONTROL CABLE COVER


    B167796
  1. Remove the screw.

  1. Remove the cap and nut.

  1. Detach the clamp and remove the cable cover.



2. REMOVE HOOD LOCK ASSEMBLY


    B166022
  1. Remove the cap.

  1. Remove the 2 bolts and nut.

  1. Remove the hood lock.

  1. w/ Theft Deterrent System:

    1. Disconnect the hood lock control cable.



3. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    B166023
  1. Detach the 2 claws.

  1. Disconnect the hood lock control cable and remove the hood lock lever.



4. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY



B166024E01

  1. Using a screwdriver, detach the cable from the clamps shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.

  1. Pull the cable from the engine room and remove it.