Home › BODY › ENGINE HOOD / DOOR › FRONT DOOR (for Double Cab)

FRONT DOOR (for Double Cab) > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT FRONT DOOR PANEL SUB-ASSEMBLY LH


  1. Check that the clearance measurements of areas A to J are within the standard range.


    B166223E02


    Standard measurement:

    Area
    Specified Condition
    Area
    Specified Condition
    A
    3.7 to 6.7 mm (0.146 to 0.264 in.)
    F
    2.7 to 5.7 mm (0.106 to 0.224 in.)
    B
    -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)
    G
    3.2 to 6.2 mm (0.126 to 0.244 in.)
    C
    3.5 to 6.5 mm (0.138 to 0.256 in.)
    H
    2.8 to 5.8 mm (0.110 to 0.229 in.)
    D
    2.2 to 5.2 mm (0.0866 to 0.205 in.)
    I
    4.7 to 7.7 mm (0.185 to 0.303 in.)
    E
    3.2 to 6.2 mm (0.126 to 0.244 in.)
    J
    -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)