Home › BODY › ENGINE HOOD / DOOR › TAIL GATE

TAIL GATE > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT LUGGAGE COMPARTMENT DOOR PANEL SUB-ASSEMBLY


  1. Check that the clearance measurements of areas A to B are within the standard range.


    B166224E01

    Standard measurement:
    Area
    Specified Condition
    A
    2.7 to 5.7 mm (0.106 to 0.224 in.)
    B
    -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)