Home › TRANSMISSION ยท AB60F AUTOMATIC TRANSMISSION › SHIFT LEVER ASSEMBLY (for Floor Shift Type)

SHIFT LEVER ASSEMBLY (for Floor Shift Type) > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT SHIFT LEVER POSITION
  1. When moving the shift lever from the P to R position with the ignition switch ON and brake pedal depressed, make sure that it moves smoothly and correctly into position.

  1. Start the engine and make sure that the vehicle moves forward after moving the shift lever from the N to D position and moves rearward after moving the shift lever to the R position.
    If the operation cannot be performed as specified, inspect the park/neutral position switch assembly and check the shift lever assembly installation condition.