Home › BODY › WINDSHIELD / WINDOWGLASS › FRONT PASSENGER SIDE POWER WINDOW SWITCH

FRONT PASSENGER SIDE POWER WINDOW SWITCH > INSPECTION

for Preparation Click here



1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY


B166135E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    4 (U) - 3 (B)
    UP
    Below 1 Ω
    1 (D) - 2 (SD)
    4 (U) - 5 (SU)
    OFF
    1 (D) - 2 (SD)
    4 (U) - 5 (SU)
    DOWN
    1 (D) - 3 (B)

    1. If the result is not as specified, replace the regulator switch.