Home › BODY ELECTRICAL › LIGHTING › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > REASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedures for the RH and LH side.
  2. The procedures listed below are for the LH side.



1. INSTALL BACK-UP LIGHT BULB


    E144952
  1. Install the bulb to the socket.

  1. Insert the bulb/socket unit into the combination light.

  1. Turn the bulb/socket unit in the direction indicated by the arrow to install it.



2. INSTALL REAR TURN SIGNAL LIGHT BULB


    E144953
  1. Install the bulb to the socket.

  1. Insert the bulb/socket unit into the combination light.

  1. Turn the bulb/socket unit in the direction indicated by the arrow to install it.



3. INSTALL TAIL AND STOP LIGHT BULB


    E144954
  1. Install the bulb to the socket.

  1. Insert the bulb/socket unit into the combination light.

  1. Turn the bulb/socket unit in the direction indicated by the arrow to install it.