Home › BODY ELECTRICAL › LIGHTING › HIGH MOUNTED STOP LIGHT ASSEMBLY

HIGH MOUNTED STOP LIGHT ASSEMBLY > REASSEMBLY

for Preparation Click here



1. INSTALL LIGHT BULB


    E144960
  1. Install the bulb to the socket.

  1. Insert the bulb/socket unit into the stop light.

  1. Turn the bulb/socket unit in the direction indicated by the arrow to install it.



2. INSTALL HIGH MOUNTED STOP LIGHT LENS

HINT:
Perform these procedures only when replacing the bulb.



    E147863
  1. Install the 3 bulbs.

  1. Install a new gasket.

    HINT:
    Only perform this procedure if the gasket was removed.



    E145745
  1. Install the lens with the 4 screws.