Home › BODY ELECTRICAL › LIGHTING › HAZARD WARNING SWITCH

HAZARD WARNING SWITCH > REMOVAL

for Preparation Click here



1. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    E145052
  1. Detach the 4 claws.



    E145049
  1. for Column Shift Type:
    Move the shift lever to the S position.

  1. Detach the 12 clips.

  1. Disconnect the connectors and clamps.



  1. Remove the wire harness from the slots, and then remove the finish panel.


    E145053E01



2. REMOVE HAZARD WARNING SWITCH


    E142746
  1. Detach the 2 claws and remove the switch.