Home › BODY ELECTRICAL › LIGHTING › ROOM LIGHT ASSEMBLY (for Long Type)

ROOM LIGHT ASSEMBLY (for Long Type) > REMOVAL

for Preparation Click here




1. REMOVE ROOF CONSOLE BOX ASSEMBLY
  1. Using a screwdriver, detach the 4 claws and remove the lens.

    HINT:
    Tape the screwdriver tip before use.

  1. Bend up part A shown in the illustration, and remove the 2 screws.

  1. Remove the 4 screws.



  1. Disconnect the connector and then remove the roof console box.


    B165838E02