CRUISE CONTROL MAIN SWITCH > INSPECTION |
| 1. INSPECT CRUISE CONTROL MAIN SWITCH |
Measure the resistance according to the value(s) in the table below.

| Tester Connection | Switch Condition | Specified Condition |
| 1 (ECC) - 3 (CCS) | Neutral | 10 kΩ or higher |
| +RES | 235 to 245 Ω | |
| -SET | 620 to 640 Ω | |
| CANCEL | 1510 to 1570 Ω | |
| Main Switch OFF | 10 kΩ or higher | |
| Main Switch ON | Below 1 Ω |