DTC B1497/97 BUS IC Communication Malfunction |
| DTC Code | DTC Detection Condition | Trouble Area |
| B1497/97 | Communication line error or open |
|

| 1.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER - BODY GROUND) |
![]() |
Disconnect the J19 air conditioning amplifier connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| J19-14 (GND) - Body ground | Always | Below 1 Ω |
|
| ||||
| OK | |
| 2.CHECK AIR CONDITIONING AMPLIFIER |
![]() |
Reconnect the J19 air conditioning amplifier connector.
Measure the resistance and voltage according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| J19-14 (GND) - z1-2 (BUS G) | Always | Below 1 Ω |
| Tester Connection | Condition | Specified Condition |
| z1-4 (B BUS) - z1-2 (BUS G) | Always | 11 to 14 V |
|
| ||||
| OK | |
| 3.REPAIR OR REPLACE AIR CONDITIONING HARNESS |
Repair or replace the air conditioning harness.
| NEXT | |
| 4.CHECK FOR DTC |
Clear the DTC (Click here).
Check for DTC (Click here).
|
| ||||
| OK | ||
| ||