Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › INTEGRATION CONTROL AND PANEL (for Floor Shift Type)

INTEGRATION CONTROL AND PANEL (for Floor Shift Type) > INSTALLATION

for Preparation Click here



1. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


E146074E05
  1. Connect the connector.

  1. Attach the 4 clips to install the panel.



2. INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL


    B161747
  1. Connect the connectors.

  1. Attach the 4 clips to install the finish panel.



3. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY
  1. w/ Trailer Towing System:
    Connect the connector.

  1. Attach the 6 clips to install the console panel.



  1. Install the clip.


    B171298



4. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    B161742
  1. Attach the 12 clips to install the console panel.



5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    B167312
  1. Install the shift lever knob and twist it in the direction indicated by the arrow.



6. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    B164474
  1. Attach the 12 clips to install the finish panel.

  1. Connect the connector and clamp.



7. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH


    B163883
  1. for Automatic Air Conditioning System:
    Attach the 2 claws to install the sensor.



    B168286
  1. Connect the connectors.

  1. Attach the 4 clips and claw to install the finish panel.

  1. Install the 2 bolts.

  1. Install the hood lock control lever.



8. INSTALL INSTRUMENT SIDE PANEL LH


    B163942
  1. Attach the 7 claws to install the side panel.



9. INSTALL COWL SIDE TRIM BOARD LH
  1. for Regular Cab:
    Install the cowl side trim board .

  1. for Double Cab:
    Install the cowl side trim board .

  1. for CrewMax:
    Install the cowl side trim board .



10. INSTALL FRONT DOOR SCUFF PLATE LH
  1. for Regular Cab:
    Install the front door scuff plate .

  1. for Double Cab:
    Install the front door scuff plate .

  1. for CrewMax:
    Install the front door scuff plate .