SEAT HEATER SWITCH (for Floor Shift Type) > INSTALLATION |
| 1. INSTALL SEAT HEATER SWITCH RH |
![]() |
Attach the 2 claws to install the seat heater switch.
| 2. INSTALL SEAT HEATER SWITCH LH |
![]() |
Attach the 2 claws to install the seat heater switch.
| 3. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY |
![]() |
Connect the integration control and panel connectors.
Attach the 4 clips to install the panel.
| 4. INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL |
![]() |
Connect the connectors.
Attach the 4 clips to install the finish panel.
| 5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Attach the 12 clips to install the console panel.
| 6. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
w/ Trailer Towing System:
Connect the connector.
Attach the 6 clips to install the console panel.
Install the clip.

| 7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Install the shift lever knob and twist it in the direction indicated by the arrow.
| 8. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
![]() |
Attach the 12 clips to install the finish panel.
Connect the connector and clamp.
| 9. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
![]() |
for Automatic Air Conditioning System:
Attach the 2 claws to install the sensor.
![]() |
Connect the connectors.
Attach the 4 clips and claw to install the finish panel.
Install the 2 bolts.
Install the hood lock control lever.
| 10. INSTALL INSTRUMENT SIDE PANEL LH |
![]() |
Attach the 7 claws to install the side panel.
| 11. INSTALL COWL SIDE TRIM BOARD LH |
for Double Cab:
Install the cowl side trim board .
for Regular Cab:
Install the cowl side trim board .
| 12. INSTALL FRONT DOOR SCUFF PLATE LH |
for Double Cab:
Install the front door scuff plate .
for Regular Cab:
Install the front door scuff plate .