SEAT HEATER SWITCH (for Column Shift Type) > INSTALLATION |
| 1. INSTALL SEAT HEATER SWITCH RH |
![]() |
Attach the 2 claws to install the seat heater switch.
| 2. INSTALL SEAT HEATER SWITCH LH |
![]() |
Attach the 2 claws to install the seat heater switch.
| 3. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY |
![]() |
Connect the integration control and panel connectors.
Attach the 4 clips to install the panel.
| 4. INSTALL INSTRUMENT PANEL CUP HOLDER ASSEMBLY |
![]() |
Attach the 4 clips to install the cup holder.
Install the 4 screws.
![]() |
Attach the 2 claws to install the door box.
| 5. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL |
![]() |
Connect the connectors.
Attach the 4 clips to install the finish panel.
Install the 2 screws.
| 6. INSTALL ASH RECEPTACLE LIGHT BULB |
| 7. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
![]() |
Attach the 12 clips to install the finish panel.
Connect the connector and clamp.
| 8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
![]() |
for Automatic Air Conditioning System:
Attach the 2 claws to install the sensor.
![]() |
Connect the connectors.
Attach the 4 clips and claw to install the finish panel.
Install the 2 bolts.
Install the hood lock control lever.
| 9. INSTALL INSTRUMENT SIDE PANEL LH |
![]() |
Attach the 7 claws to install the side panel.
| 10. INSTALL COWL SIDE TRIM BOARD LH |
for Double Cab:
Install the cowl side trim board .
for Regular Cab:
Install the cowl side trim board .
| 11. INSTALL FRONT DOOR SCUFF PLATE LH |
for Double Cab:
Install the front door scuff plate .
for Regular Cab:
Install the front door scuff plate .