Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › ROOM TEMPERATURE SENSOR (for Automatic Air Conditioning System)

ROOM TEMPERATURE SENSOR (for Automatic Air Conditioning System) > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR SCUFF PLATE LH
  1. for Regular Cab:
    Remove the front door scuff plate .

  1. for Double Cab:
    Remove the front door scuff plate .

  1. for CrewMax:
    Remove the front door scuff plate .



2. REMOVE COWL SIDE TRIM BOARD LH
  1. for Regular Cab:
    Remove the cowl side trim board .

  1. for Double Cab:
    Remove the cowl side trim board .

  1. for CrewMax:
    Remove the cowl side trim board .



3. REMOVE INSTRUMENT SIDE PANEL LH
  1. for Column Shift Type:
    Remove the instrument side panel .

  1. for Floor Shift Type:
    Remove the instrument side panel .



4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
  1. for Column Shift Type:
    Remove the instrument panel finish panel .

  1. for Floor Shift Type:
    Remove the instrument panel finish panel .



5. REMOVE ROOM TEMPERATURE SENSOR


E142191
  1. Detach the 2 claws and remove the sensor.