INTEGRATION CONTROL AND PANEL (for Column Shift Type) > REMOVAL |
| 1. REMOVE FRONT DOOR SCUFF PLATE LH |
for Regular Cab:
Remove the front door scuff plate .
for Double Cab:
Remove the front door scuff plate .
for CrewMax:
Remove the front door scuff plate .
| 2. REMOVE COWL SIDE TRIM BOARD LH |
for Regular Cab:
Remove the cowl side trim board .
for Double Cab:
Remove the cowl side trim board .
for CrewMax:
Remove the cowl side trim board .
| 3. REMOVE CENTER LOWER INSTRUMENT COVER |
Remove the 2 clips and cover.

| 4. REMOVE INSTRUMENT SIDE PANEL LH |
![]() |
Using a moulding remover, detach the 7 claws and remove the side panel.
| 5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
![]() |
Remove the hood lock control lever.
Remove the 2 bolts.
Detach the 4 clips and claw.
![]() |
for Automatic Air Conditioning System:
Detach the 2 claws and remove the sensor.
Remove the finish panel and then disconnect the connectors.
| 6. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
![]() |
Disconnect the connector and clamp.
Detach the 12 clips and remove the finish panel.
| 7. REMOVE FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY |
| 8. REMOVE LOWER INSTRUMENT CLUSTER FINISH PANEL |
![]() |
Remove the 2 screws.
Detach the 4 clips.
Remove the finish panel and then disconnect the connectors.
| 9. REMOVE INSTRUMENT PANEL CUP HOLDER ASSEMBLY |
![]() |
Detach the 2 claws and remove the door box.
![]() |
Remove the 4 screws.
Detach the 4 clips and remove the cup holder.
| 10. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY |
![]() |
Detach the 4 clips.
Disconnect the connector and remove the panel.