Home › BODY › SEAT › SEAT HEATER SWITCH (for Column Shift Type)

SEAT HEATER SWITCH (for Column Shift Type) > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR SCUFF PLATE LH
  1. for Double Cab:
    Remove the front door scuff plate .

  1. for Regular Cab:
    Remove the front door scuff plate .



2. REMOVE COWL SIDE TRIM BOARD LH
  1. for Double Cab:
    Remove the cowl side trim board .

  1. for Regular Cab:
    Remove the cowl side trim board .



3. REMOVE INSTRUMENT SIDE PANEL LH


    B160581
  1. Using a moulding remover, detach the 7 claws and remove the side panel.



4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH


    B160582
  1. Remove the hood lock control lever.

  1. Remove the 2 bolts.

  1. Detach the 4 clips and claw.



    B163883
  1. for Automatic Air Conditioning System:
    Detach the 2 claws and remove the sensor.

  1. Remove the finish panel and then disconnect the connectors.



5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    B160583
  1. Disconnect the connector and clamp.

  1. Detach the 12 clips and remove the finish panel.



6. REMOVE ASH RECEPTACLE LIGHT BULB


7. REMOVE LOWER INSTRUMENT CLUSTER FINISH PANEL


    B160587
  1. Remove the 2 screws.

  1. Detach the 4 clips.

  1. Remove the finish panel and then disconnect the connectors.



8. REMOVE INSTRUMENT PANEL CUP HOLDER ASSEMBLY


    B161766
  1. Detach the 2 claws and remove the door box.



    B161767
  1. Remove the 4 screws.

  1. Detach the 4 clips and remove the cup holder.



9. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY


B168387
  1. Detach the 4 clips.

  1. Disconnect the integration control and panel connectors and remove the panel.



10. REMOVE SEAT HEATER SWITCH LH


B166546
  1. Detach the 2 claws and remove the seat heater switch.



11. REMOVE SEAT HEATER SWITCH RH


B166546
  1. Detach the 2 claws and remove the seat heater switch.