TIRE PRESSURE WARNING RESET SWITCH > INSTALLATION |
| 1. INSTALL TIRE PRESSURE WARNING RESET SWITCH |
![]() |
Attach the 2 claws to install the reset switch.
Connect the switch connector.
| 2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
![]() |
for Automatic Air Conditioning System:
Attach the 2 claws to install the sensor.
![]() |
Connect the connectors.
Attach the 4 clips and claw to install the finish panel.
Install the 2 bolts.
Install the hood lock control lever.
| 3. INSTALL INSTRUMENT SIDE PANEL LH |
![]() |
Attach the 7 claws to install the side panel.
| 4. INSTALL COWL SIDE TRIM BOARD LH |
![]() |
Attach the 2 clips to install the cowl side trim board.
Install the clip.
| 5. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab, for CrewMax) |
![]() |
Attach the 6 claws and 3 clips to install the scuff plate.
| 6. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab) |
![]() |
Attach the 6 claws and 3 clips to install the scuff plate.