FRONT BUMPER (for Steel Type Bumper) > DISASSEMBLY |
| 1. REMOVE FRONT LOWER BUMPER RETAINER SUB-ASSEMBLY |
Remove the 10 clips and retainer.

| 2. REMOVE FRONT VALANCE PANEL |
Remove the 10 bolts, 2 nuts and valance panel.

| 3. REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light) |
![]() |
Detach the 3 claws and remove the hole cover.
| 4. REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light) |
| 5. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light) |
![]() |
Detach the 2 claws and remove the fog light.
| 6. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light) |
| 7. REMOVE FOG LIGHT MOUNTING BRACKET LH (w/ Fog Light) |
![]() |
Detach the 3 claws and remove the bracket.
| 8. REMOVE FOG LIGHT MOUNTING BRACKET RH (w/ Fog Light) |
| 9. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System) |
![]() |
While pushing down on the lever with a finger to release the one claw, detach the claw on the other side to remove the ultrasonic sensor.
| 10. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System) |
![]() |
Detach the 2 claws and remove the sensor retainer from the front bumper.