Home › BODY › EXTERIOR › RADIATOR GRILLE

RADIATOR GRILLE > REMOVAL

for Preparation Click here



1. REMOVE UPPER RADIATOR GRILLE MOULDING


B162315E01
  1. Put protective tape around the moulding.

  1. Using a moulding remover, detach the 13 claws and remove the moulding.



2. REMOVE RADIATOR GRILLE SUB-ASSEMBLY


B162317
  1. Remove the 5 screws.



    B162318
  1. Remove the 2 bolts.



    B162319
  1. Remove the 10 nuts.



    B162320
  1. Detach the 2 clips and remove the radiator grille.



3. REMOVE LOWER RADIATOR GRILLE BRACKET LH


B162321
  1. Remove the bolt and nut.

  1. Detach the clip and remove the bracket.



4. REMOVE LOWER RADIATOR GRILLE BRACKET RH

HINT:
Use the same procedures described for the LH side.



5. REMOVE RADIATOR GRILLE EMBLEM


B162322
  1. Detach the 3 claws and remove the emblem.