Home › ENGINE ยท 3UR-FBE › ENGINE MECHANICAL › REAR ENGINE MOUNTING

REAR ENGINE MOUNTING > INSTALLATION

for Preparation Click here



1. INSTALL REAR NO. 1 ENGINE MOUNTING INSULATOR


    A196270
  1. Install the mounting insulator to the transmission with the 4 bolts.

    Torque:
    59 N*m{ 602 kgf*cm , 44 ft.*lbf }

  1. Install the mounting heat insulator with the bolt.

    Torque:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }



2. INSTALL NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY


    A196269
  1. Install the crossmember with the 4 bolts, 4 washers and 4 nuts.

    Torque:
    110 N*m{ 1122 kgf*cm , 81 ft.*lbf }



    A196268
  1. Install the 4 rear engine mounting insulator bolts.

    Torque:
    16 N*m{ 163 kgf*cm , 12 ft.*lbf }