Home › ENGINE ยท 2UZ-FE › ENGINE MECHANICAL › REAR ENGINE MOUNTING

REAR ENGINE MOUNTING > REMOVAL

for Preparation Click here



1. SUPPORT AUTOMATIC TRANSMISSION ASSEMBLY


    A160820E01
  1. Support the transmission with a transmission jack. Lift the transmission slightly from the crossmember.



2. REMOVE NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY


  1. for 2WD:



      C155908
    1. Remove the 4 rear engine mounting insulator bolts.



    2. C155907
    3. Remove the 4 nuts, 4 washers, 4 bolts and crossmember.



  1. for 4WD:



      C157036
    1. Remove the 4 rear engine mounting insulator bolts.



    2. C157035
    3. Remove the 4 nuts, 4 washers, 4 bolts and frame crossmember.



3. REMOVE REAR NO. 1 ENGINE MOUNTING INSULATOR


  1. for 2WD:



      C155909
    1. Remove the 4 bolts and mounting insulator from the transmission.



  1. for 4WD:



      C157037
    1. Remove the bolt and mounting heat insulator.

    2. Remove the 4 bolts and mounting insulator from the transmission.